Dental Needles

$1.00

WhatsApp Order

Dental Needles are sterile, single-use hypodermic needles specifically designed for the administration of local anesthesia in dentistry. Characterized by their gauge (diameter) and length, they are selected to target specific nerves (e.g., long 27G for mandibular blocks, short 30G for infiltrations). Their primary functions are to penetrate oral tissue precisely, allow for aspiration to ensure safe extravascular placement, and deliver anesthetic solution. As sharps, their safe handling and immediate disposal in a designated container are paramount to prevent needlestick injuries and cross-contamination, making them a critical safety-focused consumable in dental practice.

Categories: CONSUMABLES AND DISPOSABLES, Consumables, DENTAL EQUIPMENT AND SUPPLIES, Injection and Infusion Tags: Anesthesia Needle, Dental Needle, Dental Supplies, DentalSharps, Injection Needle, Medical Needle, Single Use Needle

Description

Dental Needles

PRIMARY CLINICAL & DIAGNOSTIC USES

1. Administration of Local Anesthesia

Primary Use: Penetrates oral mucosa and tissue to deliver local anesthetic solution from a cartridge into the precise anatomical location required for nerve block or infiltration anesthesia, enabling painless dental procedures.
How it helps: For the dentist and oral surgeon, dental needles provide the precision and sharpness needed to deliver anesthetic directly to target nerves with minimal tissue trauma—ensuring rapid onset and profound anesthesia. For the patient, a sharp, well-designed needle means a smooth, comfortable injection with minimal discomfort and anxiety.

2. Achieving Specific Nerve Blocks

Primary Use: Different lengths and gauges are selected to reach target nerves, with long needles for inferior alveolar nerve blocks and short needles for infiltration or supraperiosteal injections.
How it helps: For the clinician, having a range of needle lengths and gauges allows precise selection for each procedure—ensuring the needle reaches the target nerve while minimizing patient discomfort. For the patient, the right needle selection means effective anesthesia with fewer injection attempts and reduced post-injection soreness.

3. Aspiration

Primary Use: Used to withdraw back into the cartridge to check if the needle tip is within a blood vessel before injecting anesthetic, a critical safety step to prevent intravascular injection and potential systemic toxicity.
How it helps: For the dentist, aspiration provides a vital safety check before anesthetic deposition—reducing the risk of intravascular injection, systemic toxicity, and adverse reactions. For the patient, this safety step ensures that anesthesia is delivered safely, minimizing the risk of complications such as tachycardia, dizziness, or cardiovascular events.

4. Irrigation and Delivery of Other Solutions

Primary Use: Can be used to irrigate sockets post-extraction or to deliver other medicaments (e.g., antibiotics, hemostatic agents) into specific sites.
How it helps: For the oral surgeon and dentist, dental needles provide a precise delivery system for irrigating extraction sites and placing medicaments directly at the treatment site—enhancing healing and reducing post-operative complications. For the patient, this targeted delivery supports faster healing and reduces the risk of dry socket or post-extraction infection.

5. Drainage of Abscesses

Primary Use: A large-gauge needle may be used for incision and drainage of a dental abscess as part of emergency treatment.
How it helps: For the emergency dentist and oral surgeon, a large-gauge needle provides immediate access for draining purulent material from a dental abscess—relieving pressure, reducing pain, and initiating resolution of the infection. For the patient suffering from the severe pain of a dental abscess, drainage provides rapid relief and begins the healing process.

SECONDARY & SUPPORTIVE USES

1. Taking Biopsy Samples: In oral surgery, needles (often larger gauge) can be used for fine-needle aspiration of soft tissue lesions. For the clinician, this provides a minimally invasive diagnostic option; for the patient, it means biopsy can be performed with a needle rather than a scalpel.

2. Suture Removal: The sharp tip can be used to lift and cut sutures during removal. For the dental professional, this provides a convenient tool for suture removal; for the patient, it ensures clean, comfortable suture removal.

3. Veterinary Dentistry: Used identically in veterinary practice for dental procedures on animals. For the veterinarian, dental needles provide the same precision and safety; for the animal patient, it enables pain-free dental care.

KEY PRODUCT FEATURES

1. BASIC IDENTIFICATION ATTRIBUTES

Type: A sterile, single-use, hollow hypodermic needle designed for attachment to a dental syringe.
Designation: Dental Injection Needle.
Key Specifications:
- Gauge (G): The diameter of the needle. A lower gauge number means a larger diameter.
  - 25-Gauge: Common standard, good balance of strength and patient comfort.
  - 27-Gauge: Thinner, often used for palatal injections or in pediatric patients where a smaller diameter is preferred for comfort.
  - 30-Gauge: Very thin, used for superficial infiltrations where minimal discomfort is key.
  - 23-Gauge: Larger, used where deflection through dense tissue is a concern or for aspiration of fluids.
- Length: Measured from hub to tip.
  - Short (10-20mm): For infiltration injections and supraperiosteal injections in maxillary and mandibular anterior regions.
  - Long (32-35mm): For deep nerve blocks (e.g., inferior alveolar nerve block, posterior superior alveolar nerve block).

2. TECHNICAL & PERFORMANCE PROPERTIES

Construction: Made of medical-grade stainless steel. Consists of:
- Hub: The plastic (usually polypropylene) end that attaches securely to the dental syringe (typically a Luer-Lok or screw-on fitting).
- Shaft: The long, hollow metal tube.
- Bevel: The slanted, sharp tip. Long bevel needles are sharper and penetrate with less resistance but may be more likely to deflect. Short bevel needles are stronger and deflect less but may cause more tissue tearing.
Lubrication: Often coated with a medical-grade silicone lubricant to reduce penetration force and patient discomfort.
Sterility: Individually packaged and sterilized, typically by ethylene oxide (EtO) or gamma radiation.

3. PHYSICAL & OPERATIONAL PROPERTIES

Packaging: Individually packed in a rigid plastic sheath or blister within a sterile peel-pack.
Syringe Compatibility: Designed to fit standard dental aspirating syringes.
Single-Use: Must be used for one patient only and discarded immediately after use in a sharps container.

4. SAFETY & COMPLIANCE ATTRIBUTES

Regulatory Status: Class II medical device.
Sharps Safety: A critical safety device. Must be disposed of in a puncture-resistant, labeled sharps container immediately after use to prevent needlestick injuries.
Biocompatibility: Must be non-toxic and non-pyrogenic.
Sterility Assurance: Must be sterile and non-pyrogenic.

5. STORAGE & HANDLING ATTRIBUTES

Storage: Store in a cool, dry place. Keep in original packaging until ready for use.
Shelf Life: Has an expiration date. Do not use expired needles.
Inspection: Visually inspect before use. Do not use it if the packaging is damaged, the needle is bent, or the lubricant appears non-uniform.

6. LABORATORY & CLINICAL APPLICATIONS

Primary Application: An essential, single-use consumable in every dental operatory for the administration of local anesthesia.
Workflow: Selected by the dentist based on procedure and anatomy, attached to a loaded syringe immediately before administration.

SAFETY HANDLING PRECAUTIONS

1. SAFETY PRECAUTIONS

Sharps Injury Prevention (CRITICAL): Never recap a used needle. Engage the safety sheath (if present) using a one-handed scoop technique or immediately discard the unsheathed needle into a sharps container. Use a neutral zone for instrument transfer.
Aseptic Technique: Maintain sterility. Do not touch the needle shaft or allow it to contact non-sterile surfaces before injection.
Needle Bending: Do not bend the needle to change its angle. Use the correct needle path and re-angle the syringe if necessary.
Breakage Prevention: Do not insert the needle to the hub, especially in areas where sudden patient movement is possible (e.g., mandibular blocks). Leave a few millimeters visible to facilitate retrieval if rare breakage occurs.
Proper Gauge Selection: Using an overly thin needle (e.g., 30G) for a deep block may increase the risk of deflection or breakage.

2. FIRST AID MEASURES

Needlestick Injury: Immediately wash the wound with soap and running water. Do not suck the wound. Report the incident immediately to the supervisor/occupational health for follow-up (risk assessment, post-exposure prophylaxis for bloodborne pathogens like HBV, HCV, HIV).
Needle Breakage (Rare): Remain calm. Instruct the patient not to move. If a fragment is visible and easily accessible, remove it with a magnet or forceps. If not, stabilize the patient and refer for surgical retrieval. The fragment will typically remain inert.
Tissue Injury from Needle: Manage bleeding with pressure. Monitor for signs of infection.

3. FIRE FIGHTING MEASURES

Flammability: The plastic hub and packaging are combustible.
Extinguishing Media: Use water, foam, or CO₂ as appropriate for the surrounding fire.

Dental Needles

Dental Needles

PRIMARY CLINICAL & DIAGNOSTIC USES

1. Administration of Local Anesthesia

Primary Use: Penetrates oral mucosa and tissue to deliver local anesthetic solution from a cartridge into the precise anatomical location required for nerve block or infiltration anesthesia, enabling painless dental procedures.

2. Achieving Specific Nerve Blocks

Primary Use: Different lengths and gauges are selected to reach target nerves, with long needles for inferior alveolar nerve blocks and short needles for infiltration or supraperiosteal injections.

3. Aspiration

Primary Use: Used to withdraw back into the cartridge to check if the needle tip is within a blood vessel before injecting anesthetic, a critical safety step to prevent intravascular injection and potential systemic toxicity.

4. Irrigation and Delivery of Other Solutions

Primary Use: Can be used to irrigate sockets post-extraction or to deliver other medicaments (e.g., antibiotics, hemostatic agents) into specific sites.

5. Drainage of Abscesses

Primary Use: A large-gauge needle may be used for incision and drainage of a dental abscess as part of emergency treatment.

SECONDARY & SUPPORTIVE USES

1. Taking Biopsy Samples: In oral surgery, needles (often larger gauge) can be used for fine-needle aspiration of soft tissue lesions. For the clinician, this provides a minimally invasive diagnostic option; for the patient, it means biopsy can be performed with a needle rather than a scalpel.

2. Suture Removal: The sharp tip can be used to lift and cut sutures during removal. For the dental professional, this provides a convenient tool for suture removal; for the patient, it ensures clean, comfortable suture removal.

3. Veterinary Dentistry: Used identically in veterinary practice for dental procedures on animals. For the veterinarian, dental needles provide the same precision and safety; for the animal patient, it enables pain-free dental care.

1. BASIC IDENTIFICATION ATTRIBUTES

Type: A sterile, single-use, hollow hypodermic needle designed for attachment to a dental syringe.

Designation: Dental Injection Needle.

Key Specifications:

Gauge (G): The diameter of the needle. A lower gauge number means a larger diameter.

25-Gauge: Common standard, good balance of strength and patient comfort.

27-Gauge: Thinner, often used for palatal injections or in pediatric patients where a smaller diameter is preferred for comfort.

30-Gauge: Very thin, used for superficial infiltrations where minimal discomfort is key.

23-Gauge: Larger, used where deflection through dense tissue is a concern or for aspiration of fluids.

Length: Measured from hub to tip.

Short (10-20mm): For infiltration injections and supraperiosteal injections in maxillary and mandibular anterior regions.

Long (32-35mm): For deep nerve blocks (e.g., inferior alveolar nerve block, posterior superior alveolar nerve block).

2. TECHNICAL & PERFORMANCE PROPERTIES

Construction: Made of medical-grade stainless steel. Consists of:

Hub: The plastic (usually polypropylene) end that attaches securely to the dental syringe (typically a Luer-Lok or screw-on fitting).

Shaft: The long, hollow metal tube.

Bevel: The slanted, sharp tip. Long bevel needles are sharper and penetrate with less resistance but may be more likely to deflect. Short bevel needles are stronger and deflect less but may cause more tissue tearing.

Lubrication: Often coated with a medical-grade silicone lubricant to reduce penetration force and patient discomfort.

Sterility: Individually packaged and sterilized, typically by ethylene oxide (EtO) or gamma radiation.

3. PHYSICAL & OPERATIONAL PROPERTIES

Packaging: Individually packed in a rigid plastic sheath or blister within a sterile peel-pack.

Syringe Compatibility: Designed to fit standard dental aspirating syringes.

Single-Use: Must be used for one patient only and discarded immediately after use in a sharps container.

4. SAFETY & COMPLIANCE ATTRIBUTES

Regulatory Status: Class II medical device.

Sharps Safety: A critical safety device. Must be disposed of in a puncture-resistant, labeled sharps container immediately after use to prevent needlestick injuries.

Biocompatibility: Must be non-toxic and non-pyrogenic.

Sterility Assurance: Must be sterile and non-pyrogenic.

5. STORAGE & HANDLING ATTRIBUTES

Storage: Store in a cool, dry place. Keep in original packaging until ready for use.

Shelf Life: Has an expiration date. Do not use expired needles.

Inspection: Visually inspect before use. Do not use it if the packaging is damaged, the needle is bent, or the lubricant appears non-uniform.

6. LABORATORY & CLINICAL APPLICATIONS

Primary Application: An essential, single-use consumable in every dental operatory for the administration of local anesthesia.

Workflow: Selected by the dentist based on procedure and anatomy, attached to a loaded syringe immediately before administration.

1. SAFETY PRECAUTIONS

Sharps Injury Prevention (CRITICAL): Never recap a used needle. Engage the safety sheath (if present) using a one-handed scoop technique or immediately discard the unsheathed needle into a sharps container. Use a neutral zone for instrument transfer.

Aseptic Technique: Maintain sterility. Do not touch the needle shaft or allow it to contact non-sterile surfaces before injection.

Needle Bending: Do not bend the needle to change its angle. Use the correct needle path and re-angle the syringe if necessary.

Breakage Prevention: Do not insert the needle to the hub, especially in areas where sudden patient movement is possible (e.g., mandibular blocks). Leave a few millimeters visible to facilitate retrieval if rare breakage occurs.

Proper Gauge Selection: Using an overly thin needle (e.g., 30G) for a deep block may increase the risk of deflection or breakage.

2. FIRST AID MEASURES

Needlestick Injury: Immediately wash the wound with soap and running water. Do not suck the wound. Report the incident immediately to the supervisor/occupational health for follow-up (risk assessment, post-exposure prophylaxis for bloodborne pathogens like HBV, HCV, HIV).

Needle Breakage (Rare): Remain calm. Instruct the patient not to move. If a fragment is visible and easily accessible, remove it with a magnet or forceps. If not, stabilize the patient and refer for surgical retrieval. The fragment will typically remain inert.

Tissue Injury from Needle: Manage bleeding with pressure. Monitor for signs of infection.

3. FIRE FIGHTING MEASURES

Flammability: The plastic hub and packaging are combustible.

Extinguishing Media: Use water, foam, or CO₂ as appropriate for the surrounding fire.

Related products

BRANDS

FOLLOW US