Showing all 9 results

Show sidebar
Show 50 100 250 500 All
Analog Heating Magnetic Stirrer Amaris Medical
Compare

 Analog Heating Magnetic Stirrer(MS-H-S)

Analog Heating Magnetic Stirrer is a robust, TÜV‑certified benchtop instrument engineered for accurate, safe, and economical heating and simultaneous stirring in clinical diagnostics, pharmaceutical quality control, analytical chemistry, and academic research laboratories worldwide. Featuring a 5‑inch (φ135 mm) round, ceramic‑coated stainless steel work plate, this analog hotplate stirrer delivers a heating range of room temperature +5 °C to 340 °C and a stepless stirring speed range of 100 to 1500 rpm with a maximum stirring capacity of 20 litres of water.
Every  Analog Heating Magnetic Stirrer is individually factory‑calibrated and supplied with a calibration certificate traceable to international standards. The maintenance‑free, spark‑free DC brushless motor provides consistent, quiet agitation without routine upkeep, and the ceramic‑coated stainless steel work plate resists strong acids, strong alkalis, and organic solvents, offering rapid, uniform heating without localised hot spots. Two independent, intuitive analog control knobs (dual rotary knobs) allow simple, direct control over temperature and speed, and the integrated operation indicator light confirms heating status at a glance.
Key user‑focused features for clinical and QC workflows include a large 20‑litre stirring capacity – ideal for bulk buffer and reagent preparation; a 500 W heating system enabling rapid temperature ramp‑up to 340 °C; and independent control of heating and stirring, allowing the unit to be used as a hotplate‑only, stirrer‑only, or combined hotplate stirrer.
Safety is a priority with TÜV certification (CE, cTUVus, FCC), an independent safety circuit providing over‑temperature protection (420 °C hardware cutoff), an independent residual heat warning indicator (“HOT” flashes on the control panel at >50 °C and continues even after the unit is turned off if still connected to mains, until the plate is safe to touch), and an IP42‑rated housing offering robust dust‑ and water‑splashing protection – an upgrade over basic IP21 designs, making the Analog Heating Magnetic Stirrer well suited to busy clinical, QC, and teaching labs where spills and splashes are routine.
With a compact footprint (160 × 280 mm), moderate weight (2.8 kg), and universal power supply (100–240 V, 50/60 Hz), the MS‑H‑S occupies minimal bench space while delivering reliable performance suitable for a wide range of clinical and research workflows. The instrument is backed by a 2‑year manufacturer’s warranty and is supported by a global distributor network.
For the clinical laboratory scientist, pharmaceutical QC technician, and teaching laboratory instructor, the  Analog Heating Magnetic Stirrer delivers the reliable, large‑capacity, and simple‑to‑operate heating and stirring required for routine buffer preparation, media processing, staining solution mixing, and any general‑purpose heating or stir‑only task where an economical and durable analog hotplate stirrer up to 340 °C is needed. For the patient, the reliable performance of this TÜV‑certified instrument ensures that diagnostic reagents and quality control samples are prepared consistently and cost‑effectively, supporting accurate routine diagnostics, efficient laboratory operations, and patient safety.
Add to wishlist
LCD Digital Enhanced Magnetic Hotplate Stirrer
Compare

LCD Digital Enhanced Magnetic Hotplate Stirrer (MS‑H‑ProM-with Timer)

The  LCD Digital Enhanced Magnetic Hotplate Stirrer (with Timer) is a premium, TÜV‑certified benchtop instrument engineered for accurate, safe, and consistent simultaneous heating and stirring – especially in challenging applications involving viscous liquids – in pharmaceutical bioprocessing, clinical diagnostics, and industrial research. Featuring a 5‑inch (φ135 mm) ceramic‑coated aluminum work plate, this enhanced hotplate stirrer delivers a heating range of room temperature to 340 °C (±1 °C accuracy in 1 °C increments) and a stirring speed range of 100 to 1500 rpm (±1 rpm accuracy) with a maximum stirring capacity of 20 litres of water.
Every LCD Digital Enhanced Magnetic Hotplate Stirrer is individually factory‑calibrated and supplied with a calibration certificate traceable to international standards. The high‑resolution LCD display simultaneously shows set and actual values for temperature, speed, and timer, providing complete operational visibility at a glance. The ceramic‑coated aluminum work plate resists strong acids, strong alkalis, and organic solvents, providing rapid, uniform heating without localised hot spots. Crucially, enhanced magnets and a high‑torque brushless DC motor guarantee outstanding stirring performance even with highly viscous liquids (e.g., 50 % glycerol, polymer melts), preventing stir bar decoupling and ensuring smooth, stable mixing.
Key user‑focused features for industrial and clinical workflows include three selectable heating modes (fast, standard, and steady) for optimal thermal control; a fully integrated programmable timer (1 min to 99 h 59 min) for fully unattended automated operation – with automatic heating shut‑off while continuing stirring to protect heat‑sensitive samples; an optional PT1000 external temperature sensor (±0.2 °C accuracy) for precise regulation of the actual sample liquid temperature; an RS232 remote control and data‑logging interface for GLP‑compliant experiment documentation; and the ability to run the instrument as a combined heating/stirring unit, a stirring‑only unit, or a heating‑only unit.
Safety is exemplary with TÜV certification (CE, cTUVus, FCC), dual independent safety circuits providing redundant over‑temperature protection (420 °C hardware cutoff), automatic short‑circuit power shut‑off via a second independent safety circuit, an independent residual heat warning indicator (“HOT” flashes on the display at >50 °C and continues even after the unit is turned off, including unplugged, until the plate is safe to touch), and IP21‑rated housing offering basic splash and dust protection. Smooth‑start technology and controlled deceleration of the enhanced magnetic drive minimize splashing and sample loss, even with heavy stir bars.
With a compact footprint (280 × 160 mm) and moderate weight (2.8 kg), the MS‑H‑ProM occupies minimal bench space while delivering high‑performance suitable for demanding industrial and clinical workflows. The instrument is backed by a 2‑year manufacturer’s warranty and is supported by a global distributor network.
For the pharmaceutical bioprocess scientist, industrial chemist, clinical laboratory technician, and trace element analyst, the LCD Digital Enhanced Magnetic Hotplate Stirrer delivers the high‑throughput versatility (20‑litre stirring capacity), high‑temperature performance (340 °C), advanced timer automation, and true regulatory‑grade safety required for sample digestion for trace element analysis (heavy metals, blood lead, urine cadmium), high‑viscosity formulation development, quality‑control sample preparation, and general‑purpose heating and mixing. For the patient, the reliable performance of this advanced, TÜV‑certified instrument ensures that diagnostic tests and pharmaceutical products are accurate, reproducible, and processed efficiently, directly supporting effective clinical decision‑making, appropriate treatment selection, and patient safety.
Add to wishlist
LCD Digital Heating Magnetic Stirrer Amaris Medical
Compare

LCD Digital Heating Magnetic Stirrer (MS‑H280‑F1000)

The LCD Digital Heating Magnetic Stirrer is a modular, high‑throughput, and safety‑oriented benchtop instrument designed for precise, uniform large‑volume heating and efficient mixing in clinical diagnostics, pharmaceutical QC, analytical chemistry, and industrial research.
Engineered with a quick‑change interchangeable heating jacket specifically for 1000 mL round‑bottom flasks (inner diameter 144.75 mm), it can also be adapted for 100 mL, 250 mL, and 500 mL flasks or beakers by simply swapping the mantle. The system offers a stirring speed range of 200 to 1500 rpm (±20 rpm) and controllable heating from 25 °C to 280 °C (±1 % / ±1 °C), with all parameters displayed on a high‑resolution LCD screen. The built‑in PID controller is supported by a temperature self‑calibration function and an external PT1000 port (±0.2 °C). When the heating mantle is detached, the same unit becomes a high‑power magnetic stirrer with a 20 L stirring capacity (water) on its ceramic‑coated work plate.
Overall dimensions are 295 × 160 × 160 mm, with a net weight of 3.7 kg. The system is TÜV‑certified (CE, cTUVus, FCC), IP21‑rated, and built with a fire‑resistant metal outer casing. Key safety features include dual‑circuit redundant protection, a “HOT” warning indicator that remains active even after disconnection (>50 °C), and a safety lock to prevent accidental changes during operation. The brushless DC motor is maintenance‑ and spark‑free, and the instrument automatically saves the last used parameters.
For the clinical laboratory scientist, pharmaceutical QC chemist, and industrial production engineer, LCD Digital Heating Magnetic Stirrer delivers the modular versatility and large‑batch processing capacity required for trace element analysis (blood lead, urine cadmium), bulk gel melting, and large‑scale dissolution testing. For the patient, its reliable, accurate, and safe thermal processing ensures that life‑saving diagnostic tests and pharmaceutical therapies remain consistently reliable and reproducible.
Add to wishlist
LCD Digital Heating Magnetic Stirrer Amaris Medical
Compare

LCD Digital Heating Magnetic Stirrer (MS‑H280‑F500)

The  LCD Digital Heating Magnetic Stirrer is a modular, medium‑capacity, and safety‑oriented benchtop instrument designed for precise, uniform medium‑to‑large‑volume heating and efficient mixing in clinical diagnostics, pharmaceutical QC, analytical chemistry, and industrial research.
Engineered with a quick‑change interchangeable heating jacket specifically for 500 mL round‑bottom flasks (inner diameter 118.75 mm), it can also be adapted for 100 mL, 250 mL, and 1000 mL flasks or beakers by simply swapping the mantle. The system offers a stirring speed range of 200 to 1500 rpm (±20 rpm) and controllable heating from 25 °C to 280 °C (±1 % / ±1 °C), with all parameters displayed on a high‑resolution LCD screen. The built‑in PID controller is supported by a temperature self‑calibration function and an external PT1000 port (±0.2 °C). When the heating mantle is detached, the same unit becomes a high‑power magnetic stirrer with a 20 L stirring capacity (water) on its ceramic‑coated work plate.
Overall dimensions are 295 × 160 × 160 mm, with a net weight of 3.7 kg. The system is TÜV‑certified (CE, cTUVus, FCC), IP21‑rated, and built with a fire‑resistant metal outer casing. Key safety features include dual independent safety circuits for redundant over‑temperature protection (420 °C hardware cutoff), a “HOT” warning indicator that remains active even after disconnection (>50 °C), and a safety lock to prevent accidental changes during operation. The brushless DC motor is maintenance‑ and spark‑free, and the instrument automatically saves the last used parameters.
For the clinical laboratory scientist, pharmaceutical QC chemist, and industrial production engineer, this instrument delivers the modular versatility and medium‑batch processing capacity required for trace element analysis (blood lead, urine cadmium), bulk gel melting, and large‑scale dissolution testing. For the patient, its reliable, accurate, and safe thermal processing ensures that life‑saving diagnostic tests and pharmaceutical therapies remain consistently reliable and reproducible.
Add to wishlist
LCD Digital Heating Magnetic Stirrer (S-H280-B500) Amaris Medical
Compare

LCD Digital Heating Magnetic Stirrer (S-H280-B500)

The LCD Digital Heating Magnetic Stirrer (S-H280-B500) is a modular, high‑safety, programmable benchtop instrument engineered for precise, safe, and versatile medium‑volume heating and stirring in clinical diagnostics, pharmaceutical quality control, analytical chemistry, and academic research laboratories. Featuring a dedicated 500 mL beaker heating mantle precisely designed for standard 500 mL borosilicate beakers, this instrument can be configured as a dedicated 500 mL beaker heater, or run in three independent modes: full heating and stirring, detached as a standard 20‑litre magnetic stirrer on its Ø135 mm ceramic‑coated work plate, or as a ”Two‑in‑One” system where one unit heats (using the heating mantle) while a separate, independent unit stirs (using the work plate) simultaneously. The system includes the PT1000 external temperature sensor, support rod, support clamp and magnetic stirring bar.
Every LCD Digital Heating Magnetic Stirrer (S-H280-B500) features a high‑resolution LCD display showing set and actual values for temperature, speed and timer; a maintenance‑free, spark‑free brushless DC motor; and an alumina‑fibre heating mantle with aluminium‑silicate (ceramic) wool insulation for uniform heat distribution and a long service life. The instrument includes the PT1000 external temperature sensor (±0.2 °C accuracy) for precise control of the actual sample liquid temperature, and a built‑in temperature self‑calibration function that further enhances accuracy for demanding applications.
Key user‑focused features for medium‑volume applications include interchangeable heating mantles for 100 mL, 250 mL, 500 mL and 1000 mL round‑bottom flasks (F series) and flat‑bottom beakers (B series), arbitrarily interchangeable; true ”Two‑in‑One” independent operation; and a compact 3.7 kg footprint (295 × 160 mm).
Safety is exemplary with TÜV certification (CE, cTUVus, FCC), two independent safety circuits providing redundant over‑temperature protection (420 °C hardware cutoff), an independent residual heat warning indicator (“HOT” flashes at >50 °C and continues even after the unit is turned off, including unplugged, until the mantle is safe to touch), and IP21‑rated housing with a fire‑resistant metal outer shell.
For the clinical laboratory scientist, trace element analyst, and pharmaceutical QC chemist, the MS‑H280‑B500 delivers the modular versatility, medium‑batch processing capacity, and high safety required for sample digestion for trace element analysis (blood lead, urine cadmium, heavy metals), medium‑volume organic synthesis, dissolution testing and solid‑liquid extraction. For the patient, the reliable performance of this instrument ensures that diagnostic tests and pharmaceutical products are accurate, reproducible and processed efficiently, directly supporting effective clinical decision‑making, appropriate treatment selection, and patient safety.
Add to wishlist
LCD Digital Heating Magnetic Stirrer-  with Heating Mantle for 1000mL Round‑bottom Flask (MS-H280-F1000)
Compare

LCD Digital Heating Magnetic Stirrer-  with Heating Mantle for 1000mL Round‑bottom Flask (MS-H280-F1000)

The LCD Digital Heating Magnetic Stirrer-  with Heating Mantle for 1000mL Round‑bottom Flask (MS-H280-F1000) is a modular, high‑safety, programmable benchtop instrument engineered for precise, safe, and versatile large‑volume heating and stirring in clinical diagnostics, pharmaceutical quality control, analytical chemistry, mining, and academic research laboratories. Featuring an interchangeable 1000 mL round‑bottom flask heating mantle precisely contoured (inner diameter 144.75 mm) for standard 1000 mL borosilicate round‑bottom flasks, this instrument can be configured as a dedicated 1000 mL round‑bottom flask heater, or run in three independent modes: full heating and stirring, detached as a standard 20‑litre magnetic stirrer on its Ø135 mm ceramic‑coated work plate, or as a ”Two‑in‑One” system where one unit heats (using the heating mantle) while a separate, independent unit stirs (using the work plate) simultaneously. The system includes the PT1000 external temperature sensor, support rod, support clamp and magnetic stirring bar.
Every  LCD Digital Heating Magnetic Stirrer (with Heating Mantle for 1000mL Round‑bottom Flask features a high‑resolution LCD display showing set and actual values for temperature, speed and timer; a maintenance‑free, spark‑free brushless DC motor; and an alumina‑fibre heating mantle with aluminium‑silicate (ceramic) wool insulation for uniform heat distribution and a long service life. The instrument includes the PT1000 external temperature sensor (±0.2 °C accuracy) for precise control of the actual sample liquid temperature, and a built‑in temperature self‑calibration function that further enhances accuracy for demanding applications.
Key user‑focused features for large‑volume applications include interchangeable heating mantles for 100 mL, 250 mL, 500 mL and 1000 mL round‑bottom flasks (F series) and flat‑bottom beakers (B series), arbitrarily interchangeable; true ”Two‑in‑One” independent operation; and a compact 3.7 kg footprint (295 × 160 mm).
Safety is exemplary with TÜV certification (CE, cTUVus, FCC), dual independent safety circuits providing redundant over‑temperature protection (420 °C hardware cutoff), an independent residual heat warning indicator (“HOT” flashes at >50 °C and continues even after the unit is turned off, including unplugged, until the mantle is safe to touch), and an IP21‑rated housing with a fire‑resistant metal outer shell.
For the clinical laboratory scientist, trace element analyst, and pharmaceutical QC chemist, the  LCD Digital Heating Magnetic Stirrer (with Heating Mantle for 1000mL Round‑bottom Flask delivers the modular versatility, large‑batch processing capacity, and high safety required for sample digestion for trace element analysis (blood lead, urine cadmium, heavy metals), large‑volume organic synthesis, reliable dissolution testing and efficient solid‑liquid extraction. For the patient, the reliable performance of this instrument ensures that diagnostic tests and pharmaceutical products are accurate, reproducible and processed efficiently, directly supporting effective clinical decision‑making, appropriate selection of treatment and patient safety.
Add to wishlist
LCD Digital Hotplate (HP380-Pro) Amaris Medical
Compare

LCD Digital Hotplate (HP380-Pro)

LCD digital hotplate (HP380‑Pro) with a 140×140 mm ceramic-coated aluminium work plate, heating from room temperature +5°C up to 380°C (1°C increments, ±0.1°C display accuracy). PID controller for stable heating without overshoot; high-resolution LCD shows actual plate temperature and timer. Optional PT1000 external sensor (±0.2°C) for sample-liquid temperature control; integrated timer for timed/unattended heating. Safety: independent 420°C over-temperature cutoff, residual “HOT” warning >50°C after power-off, and IP21-rated housing. TÜV-certified (CE, cTUVus, FCC, DIN/EN 60529); supplied with calibration certificate. Ideal for trace element sample digestion, buffer and culture media preparation, protein denaturation, and general solution heating.
Add to wishlist
LCD Digital Hotplate Magnetic Stirrer Amaris Medical
Compare

LCD Digital Hotplate Magnetic Stirrer (MS‑H380‑Pro)

The LCD Digital Hotplate Magnetic Stirrer is a high‑precision, TÜV‑certified benchtop instrument engineered for accurate, safe, and consistent heating and stirring in clinical diagnostics, pharmaceutical quality control, analytical chemistry, and academic research laboratories. Featuring a 6‑inch (140 × 140 mm) square ceramic‑coated aluminum work plate, this hotplate stirrer delivers a heating range of room temperature +5 °C to 380 °C (±1 °C accuracy) in 1 °C increments and a stirring speed range of 200 to 1500 rpm (±20 rpm) — with a maximum stirring capacity of 5 litres (water).
Every LCD Digital Hotplate Magnetic Stirrer is individually factory‑calibrated and supplied with a calibration certificate traceable to international standards. The high‑resolution LCD display simultaneously shows the actual temperature and stirring speed for immediate real‑time monitoring. The ceramic‑coated aluminum work plate resists strong acids, strong alkalis, and organic solvents, and provides rapid, uniform heat distribution without localised hot spots, while the maintenance‑free DC brushless motor (spark‑free) ensures ultra‑quiet, vibration‑free, long‑term reliability.
Key user‑focused safety features include dual independent safety circuits providing redundant over‑temperature protection — a 420 °C hardware cutoff automatically stops heating to prevent fire hazards. An independent residual heat warning (“HOT” flashes on the display at >50 °C and continues even after the unit is turned off, including unplugged, until the plate is safe to touch protects users from burns. An optional PT1000 external temperature sensor (±0.5 °C accuracy) provides precise closed‑loop control of the actual sample liquid temperature. The instrument is IP21‑rated for basic splash and dust protection, manufactured under ISO 9001 and ISO 13485 quality management systems, and TÜV‑certified (CE, cTUVus, FCC).
With a compact footprint (320 × 180 mm) and low weight (2.2 kg), the MS‑H380‑Pro occupies minimal bench space while delivering performance suitable for demanding clinical and research workflows. The instrument includes a 2‑year manufacturer’s warranty.
For the clinical laboratory scientist, trace element analyst, pharmaceutical QC chemist, and research scientist, the LCD Digital Hotplate Magnetic Stirrer delivers the high‑performance, safety, and reproducibility required for sample digestion for trace element analysis (heavy metals, blood lead, urine cadmium), 5‑litre quality control sample preparation (buffers, standards), and general‑purpose heating and mixing. For the patient, the reliable performance of this TÜV‑certified instrument ensures that diagnostic tests and pharmaceutical products are accurate, reproducible and processed efficiently, directly supporting effective clinical decision‑making, appropriate treatment selection, and patient safety.
Add to wishlist
LED Digital Magnetic Hotplate Stirrer (MS‑H280‑Pro)Amaris chemicals
Compare

LED Digital Magnetic Hotplate Stirrer (MS‑H280‑Pro)

The DLAB  LED Digital Magnetic Hotplate Stirrer‑Pro LED Digital Magnetic Hotplate Stirrer is a compact, economical benchtop instrument engineered for straightforward heating and stirring in clinical diagnostics, pharmaceutical quality control, analytical chemistry, molecular biology and teaching laboratories. Featuring a 5‑inch (φ135 mm) ceramic‑coated stainless steel work plate, this hotplate stirrer provides a temperature range from room temperature up to 280 °C in 1 °C increments and a stirring speed range of 200 to 1500 rpm (maximum stirring capacity 3 litres of water). The LED digital display shows both temperature and stirring speed simultaneously for quick and clear monitoring.
Every  LED Digital Magnetic Hotplate Stirrer‑Pro is factory‑calibrated and supplied with a calibration certificate. The maintenance‑free DC brushless motor is spark‑free and low‑noise, and the stainless steel work plate with durable ceramic coating offers good chemical resistance to many common acids, alkalis and organic solvents, simplifying cleaning.
Key safety features include an independent safety circuit with over‑temperature protection (320 °C hardware cutoff) that automatically stops heating to prevent fire hazards, and an independent residual heat warning (“HOT” flashes on the LED display when the plate exceeds 50 °C and continues even after the unit is powered off) to protect users from burns. The optional PT1000 external temperature sensor (±0.2 °C to ±0.5 °C accuracy) provides precise control for applications where the actual sample temperature must be tightly regulated.
With a compact footprint (260 × 150 mm) and low weight (1.8 kg), the  LED Digital Magnetic Hotplate Stirrer‑Pro occupies minimal bench space and is easily moved between workstations as needed. TÜV‑certified with CE, cTUVus, FCC, CB and UKCA safety approvals, the instrument is manufactured under ISO 9001 and ISO 13485 quality management systems and is backed by a 2‑year manufacturer’s warranty (in most regions).
For the clinical laboratory scientist, pharmaceutical QC analyst, research technician, and teaching laboratory instructor, the  LED Digital Magnetic Hotplate Stirrer‑Pro delivers safe, repeatable and compact heating and stirring required for routine reagent preparation, culture‑media processing, and general laboratory workflows. For the patient, consistent and reliable laboratory operations supported by this instrument help ensure accurate diagnostic results and the safe, effective quality control of pharmaceutical products.
Add to wishlist