Non woven medical crepe

$1.00

WhatsApp Order

Non Woven Medical Crepe is a lightweight, conformable bandage made from bonded synthetic fibers, designed for securing wound dressings, providing light compression, and supporting injured joints and limbs. Unlike traditional woven crepe bandages, non-woven construction offers enhanced softness, reduced lint, and hypoallergenic properties—making it particularly suitable for patients with sensitive skin or textile allergies. Featuring limited stretch for conformability, this breathable bandage molds to body contours without restricting circulation. Available in widths from 5cm to 20cm and standard 4.5-meter lengths, non woven medical crepe is a versatile, non-sterile bandage used across clinical settings. For the clinician, it provides reliable dressing retention and gentle support for sprains, strains, and soft tissue swelling. For the patient, non woven medical crepes offer comfortable, non-irritating bandaging with minimal risk of allergic reaction, allowing natural movement while protecting healing tissues.

Categories: CONSUMABLES AND DISPOSABLES, Wound Care Tags: Conforming Bandage, Dressing Retention Bandage, First Aid Bandage, Hypoallergenic Bandage, Light Support Bandage, Lint-Free Bandage, Non Woven Medical Crepe, Non-Woven Crepe Bandage, Synthetic Crepe Bandage

Description

Non Woven Medical Crepe

PRIMARY CLINICAL & DIAGNOSTIC USES

1. Securement of Wound Dressings

Primary Use: Provides a lightweight, conformable, non-woven bandage used to secure primary and secondary wound dressings in place without the need for adhesive tapes.
How it helps: For the nurse and wound care clinician, non woven medical crepe offers a soft, flexible, breathable bandage that conforms to body contours—holding dressings securely over joints, limbs, and irregular surfaces where adhesive tapes may fail or cause skin irritation. For the patient, non woven medical crepe provides comfortable, non-irritating dressing retention that allows natural movement without the discomfort of adhesive removal.

2. Application of Light Compression

Primary Use: Wrapped with controlled tension to provide light compression for management of soft tissue swelling, sprains, strains, and venous conditions.
How it helps: For the clinician managing patients with ankle sprains, wrist strains, or early venous insufficiency, non woven medical crepe delivers mild, even compression that reduces edema and provides proprioceptive support—enhancing patient comfort and promoting recovery. For the patient, this light compression helps control swelling, reduces pain, and provides a sense of stability during movement.

3. Conforming Support for Joints and Limbs

Primary Use: Provides flexible, conforming support for injured or weakened joints, muscles, and tendons without restricting circulation or movement.
How it helps: For the physical therapist and sports medicine clinician, non woven medical crepe bandages offer adaptable support that can be wrapped around elbows, knees, ankles, and wrists—providing gentle stabilization that allows continued activity while protecting healing tissues. For the patient, this means they can maintain mobility during recovery while receiving therapeutic support that reduces pain and prevents re-injury.

4. Protection of Vulnerable Skin Areas

Primary Use: Wrapped around pressure points, bony prominences, and fragile skin areas to provide a protective layer against friction and shear forces.
How it helps: For the nurse caring for elderly or immobile patients, non woven medical crepe applied to heels, elbows, and sacral areas provides a soft, breathable barrier that reduces friction damage from bedding and movement. For the patient, this protection reduces the risk of pressure injuries and skin tears, maintaining skin integrity during prolonged bedrest or immobilization.

SECONDARY & SUPPORTIVE USES

1. Post-Venipuncture Pressure Application: Used to hold pressure pads in place following blood draws, IV insertion, or arterial puncture procedures.

2. Securing of Catheters and Tubing: Used to wrap around and secure urinary catheters, IV lines, and drainage tubes to prevent accidental dislodgment.

3. Orthopedic Cast Padding: Used as a protective layer beneath plaster or fiberglass casts to provide cushioning and moisture absorption.

4. Splinting and Immobilization: Used to secure splints and immobilization devices in place during emergency and orthopedic care.

5. Management of Lymphoedema: Used as a component of multilayer compression bandaging for lymphoedema management.

6. Post-Operative Wrapping: Used following surgical procedures to secure dressings and provide gentle compression to reduce post-operative swelling.

7. First Aid Applications: Used in first aid for securing dressings and providing support for sprains and strains in community and home settings.

8. Pediatric Wrapping: Used for securing dressings and providing support for children with minor injuries or post-procedural needs.

9. Sports Taping Base: Used as an under-wrap beneath athletic tape to protect skin during sports taping applications.

10. Hypoallergenic Applications: Non-woven construction makes it suitable for patients with sensitivity to woven cotton materials.

KEY PRODUCT FEATURES

1. BASIC IDENTIFICATION ATTRIBUTES

Device Type: A lightweight, conformable, non-woven bandage designed for securing dressings, providing light compression, and supporting injured joints and limbs.
Designation: Non Woven Medical Crepe, Non-Woven Crepe Bandage, Conforming Bandage, Non-Woven Support Bandage, Dressing Retention Bandage, Light Support Bandage.
Key Components:

o Material: Non-woven fabric (polyester, rayon, or polypropylene fibers bonded together).

o Texture: Soft, cloth-like texture with crepe-like conformability.

o Finish: Breathable, lint-free surface.

o Closure: Requires tape, clips, or self-closure depending on type.

o Packaging: Individually wrapped or bulk packaged rolls.

2. TECHNICAL & PERFORMANCE PROPERTIES

Material: Non-woven fabric (polyester, viscose/rayon, or polypropylene).
Fiber Bonding: Thermal, chemical, or mechanical bonding of fibers.
Stretch: Limited stretch (typically 15-40%) for conformability and light compression.
Widths: Common widths include 5cm (2 inches), 7.5cm (3 inches), 10cm (4 inches), 15cm (6 inches), and 20cm (8 inches).
Lengths: Commonly 4.5 meters (5 yards) per roll.
Breathability: High breathability allows air circulation to the skin.
Lint-Free: Non-woven construction minimizes lint and fiber shedding.
Latex-Free: Manufactured without natural rubber latex.
Sterility: Non-sterile; intended for use over sterile dressings or on clean, intact skin.

3. PHYSICAL & OPERATIONAL PROPERTIES

Construction: Non-woven fabric with soft, cloth-like hand feel.
Color: Typically white or off-white; some brands available in skin tones.
Stretch Direction: Stretchable along length of roll for conformability.
Conformability: Molds to body contours without wrinkling or bunching.
Reusability: Single-use intended; can be rewrapped if not soiled.
Washability: Not intended for washing; single patient use recommended.
Packaging: Rolled without applicator; applied by hand.

4. SAFETY & COMPLIANCE ATTRIBUTES

Regulatory Status: Class I medical device (exempt from premarket notification).
Non-Sterile: Not sterilized; intended for use on intact skin or over sterile dressings.
Latex-Free: Standard in most non-woven crepe bandages.
Hypoallergenic: Non-woven materials often better tolerated by patients with textile sensitivities.
Biocompatibility: Materials tested for skin contact safety.

5. STORAGE & HANDLING ATTRIBUTES

Storage: Store in a clean, dry location at room temperature; protect from moisture, dust, and direct sunlight.
Shelf Life: Typically 3-5 years from date of manufacture; check expiration date before use.
Inspection: Inspect for damage, discoloration, or contamination before use; discard if compromised.
Single-Patient Use: Intended for single patient use; do not reuse on different patients to prevent cross-contamination.

6. LABORATORY & CLINICAL APPLICATIONS

Primary Application: Securing wound dressings, providing light compression for soft tissue injuries, and supporting joints and limbs in acute and chronic care settings.
Clinical Role: Essential product in hospitals, clinics, emergency departments, orthopedic practices, sports medicine facilities, long-term care facilities, wound care centers, and home healthcare for dressing retention, light support, and skin protection.

SAFETY HANDLING PRECAUTIONS

1. SAFETY PRECAUTIONS

Wrapping Tension: Apply with even, moderate tension; excessive tightness may compromise circulation; excessive looseness may not provide adequate securement.
Circulation Check: After wrapping extremities, assess distal circulation, sensation, and movement; loosen if signs of compromised circulation appear (pallor, cyanosis, numbness, tingling, coldness).
Not for High Compression: Non woven medical crepe is not designed for high-compression applications such as deep vein thrombosis prophylaxis or severe venous insufficiency.
Skin Inspection: Inspect skin under bandage regularly for signs of irritation, maceration, or pressure damage.
Non-Sterile: Do not apply directly to open wounds without a sterile primary dressing.
Single-Patient Use: Discard after use on one patient; do not reuse.
Allergies: Confirm the patient has no allergies to non-woven materials (polyester, rayon, polypropylene) before use.

2. FIRST AID MEASURES

Compromised Circulation: If signs of circulatory compromise occur, immediately remove bandage and assess patient; reapply with less tension if appropriate.
Skin Irritation: If skin irritation occurs, discontinue use; clean area; consider alternative bandage material (woven crepe or cotton).
Bandage Slippage: If bandage slips or loosens during use, rewrap with appropriate tension; secure ends with tape or clips.

3. FIRE FIGHTING MEASURES

Flammability: Non-woven synthetic materials are combustible; may melt or burn if exposed to flame or high heat.
Extinguishing Media: Use water, foam, dry chemical, or CO₂ for fire involving bandages.
Fire Response: In oxygen-enriched environments, bandages may ignite more readily; follow facility fire safety protocols.

Non woven medical crepe

Non Woven Medical Crepe

PRIMARY CLINICAL & DIAGNOSTIC USES

1. Securement of Wound Dressings

Primary Use: Provides a lightweight, conformable, non-woven bandage used to secure primary and secondary wound dressings in place without the need for adhesive tapes.

2. Application of Light Compression

Primary Use: Wrapped with controlled tension to provide light compression for management of soft tissue swelling, sprains, strains, and venous conditions.

3. Conforming Support for Joints and Limbs

Primary Use: Provides flexible, conforming support for injured or weakened joints, muscles, and tendons without restricting circulation or movement.

4. Protection of Vulnerable Skin Areas

Primary Use: Wrapped around pressure points, bony prominences, and fragile skin areas to provide a protective layer against friction and shear forces.

SECONDARY & SUPPORTIVE USES

1. Post-Venipuncture Pressure Application: Used to hold pressure pads in place following blood draws, IV insertion, or arterial puncture procedures.

2. Securing of Catheters and Tubing: Used to wrap around and secure urinary catheters, IV lines, and drainage tubes to prevent accidental dislodgment.

3. Orthopedic Cast Padding: Used as a protective layer beneath plaster or fiberglass casts to provide cushioning and moisture absorption.

4. Splinting and Immobilization: Used to secure splints and immobilization devices in place during emergency and orthopedic care.

5. Management of Lymphoedema: Used as a component of multilayer compression bandaging for lymphoedema management.

6. Post-Operative Wrapping: Used following surgical procedures to secure dressings and provide gentle compression to reduce post-operative swelling.

7. First Aid Applications: Used in first aid for securing dressings and providing support for sprains and strains in community and home settings.

8. Pediatric Wrapping: Used for securing dressings and providing support for children with minor injuries or post-procedural needs.

9. Sports Taping Base: Used as an under-wrap beneath athletic tape to protect skin during sports taping applications.

10. Hypoallergenic Applications: Non-woven construction makes it suitable for patients with sensitivity to woven cotton materials.

1. BASIC IDENTIFICATION ATTRIBUTES

Device Type: A lightweight, conformable, non-woven bandage designed for securing dressings, providing light compression, and supporting injured joints and limbs.

Designation: Non Woven Medical Crepe, Non-Woven Crepe Bandage, Conforming Bandage, Non-Woven Support Bandage, Dressing Retention Bandage, Light Support Bandage.

Key Components:

o Material: Non-woven fabric (polyester, rayon, or polypropylene fibers bonded together).

o Texture: Soft, cloth-like texture with crepe-like conformability.

o Finish: Breathable, lint-free surface.

o Closure: Requires tape, clips, or self-closure depending on type.

o Packaging: Individually wrapped or bulk packaged rolls.

2. TECHNICAL & PERFORMANCE PROPERTIES

Material: Non-woven fabric (polyester, viscose/rayon, or polypropylene).

Fiber Bonding: Thermal, chemical, or mechanical bonding of fibers.

Stretch: Limited stretch (typically 15-40%) for conformability and light compression.

Widths: Common widths include 5cm (2 inches), 7.5cm (3 inches), 10cm (4 inches), 15cm (6 inches), and 20cm (8 inches).

Lengths: Commonly 4.5 meters (5 yards) per roll.

Breathability: High breathability allows air circulation to the skin.

Lint-Free: Non-woven construction minimizes lint and fiber shedding.

Latex-Free: Manufactured without natural rubber latex.

Sterility: Non-sterile; intended for use over sterile dressings or on clean, intact skin.

3. PHYSICAL & OPERATIONAL PROPERTIES

Construction: Non-woven fabric with soft, cloth-like hand feel.

Color: Typically white or off-white; some brands available in skin tones.

Stretch Direction: Stretchable along length of roll for conformability.

Conformability: Molds to body contours without wrinkling or bunching.

Reusability: Single-use intended; can be rewrapped if not soiled.

Washability: Not intended for washing; single patient use recommended.

Packaging: Rolled without applicator; applied by hand.

4. SAFETY & COMPLIANCE ATTRIBUTES

Regulatory Status: Class I medical device (exempt from premarket notification).

Non-Sterile: Not sterilized; intended for use on intact skin or over sterile dressings.

Latex-Free: Standard in most non-woven crepe bandages.

Hypoallergenic: Non-woven materials often better tolerated by patients with textile sensitivities.

Biocompatibility: Materials tested for skin contact safety.

5. STORAGE & HANDLING ATTRIBUTES

Storage: Store in a clean, dry location at room temperature; protect from moisture, dust, and direct sunlight.

Shelf Life: Typically 3-5 years from date of manufacture; check expiration date before use.

Inspection: Inspect for damage, discoloration, or contamination before use; discard if compromised.

Single-Patient Use: Intended for single patient use; do not reuse on different patients to prevent cross-contamination.

6. LABORATORY & CLINICAL APPLICATIONS

Primary Application: Securing wound dressings, providing light compression for soft tissue injuries, and supporting joints and limbs in acute and chronic care settings.

Clinical Role: Essential product in hospitals, clinics, emergency departments, orthopedic practices, sports medicine facilities, long-term care facilities, wound care centers, and home healthcare for dressing retention, light support, and skin protection.

1. SAFETY PRECAUTIONS

Wrapping Tension: Apply with even, moderate tension; excessive tightness may compromise circulation; excessive looseness may not provide adequate securement.

Circulation Check: After wrapping extremities, assess distal circulation, sensation, and movement; loosen if signs of compromised circulation appear (pallor, cyanosis, numbness, tingling, coldness).

Not for High Compression: Non woven medical crepe is not designed for high-compression applications such as deep vein thrombosis prophylaxis or severe venous insufficiency.

Skin Inspection: Inspect skin under bandage regularly for signs of irritation, maceration, or pressure damage.

Non-Sterile: Do not apply directly to open wounds without a sterile primary dressing.

Single-Patient Use: Discard after use on one patient; do not reuse.

Allergies: Confirm the patient has no allergies to non-woven materials (polyester, rayon, polypropylene) before use.

2. FIRST AID MEASURES

Compromised Circulation: If signs of circulatory compromise occur, immediately remove bandage and assess patient; reapply with less tension if appropriate.

Skin Irritation: If skin irritation occurs, discontinue use; clean area; consider alternative bandage material (woven crepe or cotton).

Bandage Slippage: If bandage slips or loosens during use, rewrap with appropriate tension; secure ends with tape or clips.

3. FIRE FIGHTING MEASURES

Flammability: Non-woven synthetic materials are combustible; may melt or burn if exposed to flame or high heat.

Extinguishing Media: Use water, foam, dry chemical, or CO₂ for fire involving bandages.

Fire Response: In oxygen-enriched environments, bandages may ignite more readily; follow facility fire safety protocols.

Related products